google-site-verification=AOc3EYxtw1bLOlFTP1HVlERTKfG9n1_FsOAsIGKf7X4

Call at +86-15260357480

Leave a message [email protected]

What you need to know about forklifts

  • 2022-09-22
We all know that forklifts play a very important role in various industries now, so what do you know about forklifts? The following hifoune forklift manufacturers will introduce to you, what kind of knowledge points do we need to know about forklifts?
On a good road, the rated lifting capacity of the forklift is 3 tons. When working in poor road conditions, the lifting capacity should be appropriately reduced and the driving speed should be reduced. When loading and unloading goods, the distance of the forks should be adjusted according to the size of the goods, and the weight of the goods should be split evenly by the two forks to prevent the eccentrically loaded or moving goods from slipping to one side. After the fork is inserted into the stack, the fork wall should be in contact with the side of the goods, and then the mast is tilted back, and the fork is raised about 200 mm from the ground before driving.
When carrying goods on a slope of more than 7°, the goods should be above the slope. Do not make sudden brakes when carrying goods to prevent the goods from slipping out. When handling large-volume goods, the goods block the line of sight, and the forklift should be driven in reverse at a low speed. It is strictly forbidden to leave the engine idling unattended after the forklift is parked, and the forklift driver cannot leave the forklift seat. It is also not allowed to hoist the cargo in the air while the driver leaves the driving position. No one may use a forklift without consent. In order to improve the service life of the forklift and prevent the occurrence of accidents, in order to maintain the operation state of the forklift and the normal operation of all parts, the machine must be regularly maintained and maintained during the use process.
When the forklift stops in the middle, when the engine is idling, it should be tilted back to the mast. When the engine is stopped, the carriage should be dropped, and the fork should be tilted forward to touch the ground. In the process of work, if suspicious noise or abnormal phenomenon is found, it must be stopped immediately for inspection, and measures should be taken to eliminate it in time.
Diesel forklifts are strictly prohibited from high-speed sharp dome driving, lifting or lowering of goods, etc. during the loading process, and no one is allowed under the lifting frame. After a working day, the fuel tank should be refueled, which can not only drive out the moisture in the fuel tank, but also prevent the water droplets condensed by the brake at night from dissolving in the oil.

Regarding the introduction of our forklift manufacturer above, if you have better forklift knowledge sharing and communication, you can also contact us in time, and we will get in touch with you in the shortest possible time.

5 ton diesel forklift

© Copyright: 2022 Xiamen Hifoune Technology Co., Ltd. All Rights Reserved.

IPv6 network supported

Friendly Links :

Alibaba Made In China
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • Refresh the image