Hifoune Forklift White Color Japan Isuzu C240 Engine 5ton Diesel Forklift

The 5ton diesel forklift will accumulate a lot of dust and debris in the long term of use, which will have a certain impact on the vehicle performance, and does not comply with the 5S regulations of the factory. Therefore, it is important to clear the isuzu engine 5 ton diesel forklift at regular intervals, which must not be ignored during use.

All forklift manufacturers will add relevant regulations and requirements for forklift cleaning and maintenance in the forklift operation rules and regulations, but the specific operation method is not clear. Some misunderstandings often occur in daily cleaning, such as direct washing with water. If the electric forklift is cleaned in this way, it will destroy the forklift.
5ton japan Isuzu engine forklift specification

First, wash with water directly. Forklift drivers use barreled water or water pipes to shower the forklift in order to save labor and time, or even directly use high-pressure water guns to wash. The sealing effect of the electric forklift is not better than that of the car. Its design is indoor operation, and it has no rain-proof and waterproof function. Everyone knows that circuit components are more afraid of water. After the electric forklift washes the body with water, the water will flow under the base along the body gap and pedal gap, causing damage to circuit components. First of all, there will be some "soft faults", that is, the forklift will be good and bad, and it will not work for a while, and it will not be repaired for a while; Then the circuit components are damaged, and the forklift is "lying down", which requires the replacement of electric contactor, cooling fan, travel switch, and even the overhaul of motor; More serious is the short circuit of battery or other circuits, smoke and fire during operation, and burn the forklift.
Second, do not turn off the power when cleaning the forklift. After parking, replace the battery and clean it. When you do not operate the electric forklift, turn off the power. Otherwise, it is possible to accidentally touch the forklift control switch, causing accidents. It is also possible that the positive and negative electrodes of the battery or other electronic components may be short-circuited when using wet rags or other metal tools. The voltage of the forklift battery exceeds the human load, and there is a risk of electric shock.
So, what is the correct way to clean the forklift? Look down.
The first is to clean the outside of the electric forklift. Before cleaning, it is necessary to turn off various power supplies of the vehicle to prevent electrical damage caused by short circuit to the vehicle during cleaning.
The exterior of the forklift body can be wiped with a wet rag.
Then when cleaning various electrical voltage components of electric forklift, it is enough to use compressed air to blow the dust on the electrical voltage. It should be noted that the electrical voltage components cannot be washed with high pressure water gun.
After cleaning the electric forklift, check the parts or parts that need to be lubricated according to the lubricating parts, and add lubricating oil in time.
In fact, the battery of the electric stacker can be washed with water, but water cannot enter the battery cell. Lift it out for flushing to avoid water ingress into some components of the forklift.
In order to maintain the flexible operation of the tires of the electric forklift, the attachments on the wheels and other parts of the vehicle should be removed in time after each transportation to avoid the impact on the operation of the vehicle.